We have 7 Specialty Licenses at Crestview Home Repair, ensuring you have a licensed and qualified contractor for each and every need:

Carpenter Contractor: “Heck, anyone can cut a board and swing a hammer…" Whether it’s removal and replacement of a door or window unit or adding a partition wall or TRIM (yes, now that’s a specialty we are familiar with), we have the knowledge and equipment like compound miter saws, slide saws, air nailers and air and impulse trim nailers. We know how to modify cabinets and countertops for special installations… … …the list goes on. We get you through the woodrot or termite damage that usually devastates a home or a sale of home.

Siding Contractor: “Heck, anyone can pop on a piece of siding…" We specialize in the repair of the wood siding in lieu of replacement when applicable and replace vinyl and composite siding easily. We know the new codes as far as the nailing procedures, and we always caulk and seal our joints when finished.

Fencing Contractor: “Heck, anyone can dig a posthole and nail a picket…" Did you know that most fences require a Permit for planning and construction? And this brings true to the ‘Call BEFORE you dig!” One inch (1”) beyond the property lines = encroachment! We specialize in wood fences….straight picket, shadow, lattice, also vinyl fences and custom work!

Home Repair / Handyman Contractor: “Heck, that means you can do ANYTHING…" Nope, this license covers a vast array of items that are forgotten on all the other licenses. Smaller repair items usually found in—and around—the home. Tightening, adjusting, removal and replacement, etc.

Home Inspector (Inspecting, Reporting, and Referral): Although I don’t do full-fledged Home Inspections anymore because of the volume of repair work, I maintain this license because of the many Inspection forms we deal with repairing work from the Home Inspection Reports. I received Certification via Correspondence Training, and was one of the first Licensed Home Inspectors in Okaloosa County, and use this license to perform Roof Certification Inspections for VA/FHA and Conventional Mortgages as well as Insurance Companies and Homeowners.

Painting Contractor: "Heck, anyone can swing a brush and a roller…" Painting Contractors are experienced in what type of paint they must use; which rollers and brushes to use (believe me…it DOES make a difference); whether Oil Base, Water Base, or Solvent Base…and where it’s ‘allowed’ to be applied. We also understand the new painting products like Mildew Resistant and Elastomeric-type Paints, and Crestview Home Repair applies all types of Ceiling and Wall Textures for professional repair results. We also have the Airless Equipment for Exterior Paint applications as well as interior.

Florida Registered Roofing License: In the State of Florida, only a licensed Roofing Contractor can perform ANY work on the roof. This includes repairing the roof, changing the DWV Boot Seals, repairing or installing Ridgevents or Roof Ventilation Systems, ect..." Many contractors will tell you that they are licensed to fix your roof, leaking boot seals or damaged ridge vents…but beware! Without a State Roofing License, they are not allowed on your roof. The Roofing License also authorizes Chip to perform Roof Certification Inspections for insurance companies, mortgage companies, and homeowners who are buying or selling their homes, and want to know the condition or 'estimated life-span' of their roof.

The best testimony in the Construction and Repair Industry